Binance error -2027, "Exceeded the maximum allowable position at current leverage.", means the order would make your position on that coin larger than Binance allows at the leverage you have set. Every contract has a ladder of size tiers and each tier has its own maximum leverage: the bigger the position, the lower the leverage. Two things fix it. Lower the leverage on that coin, or make the position smaller, which includes cancelling resting orders on the same coin because they count too. Your balance has nothing to do with it, so adding USDT changes nothing.
We have seen this on accounts our autotrader trades, with 1,000 USDT of margin per trade at 10x. On large coins that order goes through. On small coins Binance refused it, and the tier table below shows why.
What the message means
The API answers with code -2027, name MAX_LEVERAGE_RATIO, and the text "Exceeded the maximum allowable position at current leverage." The app and Binance's support page word the same refusal differently: "Order rejected due to exceeding the maximum allowable quantity at current leverage." It is one rule with two wordings.
Binance compares the value of the position the order would leave you with (quantity times price, in USDT) against the cap for your leverage on that coin. Margin is not part of the comparison. That separates it from -2019, "Margin is insufficient", where the position is allowed and the wallet cannot pay for it.
Longs and shorts share the allowance. Binance's FAQ: "The position notional limits for long and short positions are calculated together in absolute value."
The tier table: bigger position, lower maximum leverage
This is the ladder for one small coin, BTRUSDT, read from Binance's GET /fapi/v1/leverageBracket on 15 November 2026:
| Position value (USDT) | Maximum leverage | Maintenance margin rate |
|---|---|---|
| 0 to 5,000 | 10x | 5% |
| 5,000 to 40,000 | 5x | 10% |
| 40,000 to 80,000 | 4x | 12.5% |
| 80,000 to 200,000 | 3x | 16.67% |
| 200,000 to 2,000,000 | 2x | 25% |
| 2,000,000 to 5,000,000 | 1x | 50% |
Now the order from the start. At 10x this coin allows a position of 5,000 USDT. 1,000 USDT of margin at 10x asks for 10,000. Binance refuses it with -2027. The largest margin that fits at 10x is 500 USDT. A 10,000 USDT position is allowed only at 5x or lower, where it needs 2,000 USDT of margin.
The same order on BTCUSDT is nowhere near a limit: its first tier ran to 300,000 USDT that day. Small coins are where it bites. Of the 522 USDT perpetuals trading on 15 November 2026, 131 allowed 10x or more only up to 10,000 USDT of position, four stopped at 5,000 or 6,000, and three did not offer 10x at any size. A 1,000 USDT order at 10x sits exactly on the limit for a quarter of the market.
Binance revises these tables, so read today's before you size anything. Three places show it:
- The leverage control on the order panel. Binance's FAQ: "The system will display the maximum allowable position size for different tiers of leverage."
- Binance's Leverage & Margin table, per contract.
GET /fapi/v1/leverageBracket, a signed call that returnsinitialLeverage,notionalFloor,notionalCapandmaintMarginRatiofor each tier.
Why it appears when you only want to close, or with resting orders
This is the version that looks like a bug. You are not opening anything, you want out, and Binance says the position would be too large.
Binance's support page on failed orders names the cause: "When closing the position, it might also fail for exceeding the position size limit due to having open orders." Orders resting on the coin use the same allowance as the position. With the position near its cap and orders still on the book, even a closing order can be counted as too much.
Binance's instruction is short: "To close position, please cancel the open orders and try again later." In practice:
- Open the Open Orders tab for that coin and cancel what rests there.
- Close the position.
- Put back only the orders you still want, sized for what is left.
The same thing happens on entries. An order that fits on its own is refused when a position and older resting orders already take up the tier.
Fix 1: lower the leverage on that coin
Leverage is set per coin. Moving BTRUSDT from 10x to 5x lifts the cap from 5,000 to 40,000 USDT, and the 10,000 USDT position goes through.
The cost is margin. At 5x the same position needs twice the margin it needed at 10x, or the same margin buys half the position. In return the liquidation price moves further away, which on a small coin is no bad trade. How much leverage to use on signals covers that side.
Do it before you open. With a position already on the coin, lowering leverage has its own refusals: on isolated margin Binance answers -4161, "Leverage reduction is not supported in Isolated Margin Mode with open positions", and on cross margin it needs enough free balance to cover the extra margin.
Fix 2: a smaller order, or cancel resting orders
If you want to keep the leverage, the position has to fit the tier. For BTRUSDT at 10x that is 5,000 USDT in total, across every order on the coin. Holding 3,000 USDT and sending another 2,500 takes the position to 5,500, and the second order is refused although each piece is under the cap.
So count what is already there: the open position, both directions, plus the orders resting on the coin. Cancel the ones you no longer need, then size the new order to the room that is left.
For anyone sizing by margin, the arithmetic is one line: largest margin = tier cap ÷ leverage. A 5,000 USDT cap at 10x is 500 USDT of margin; a 10,000 USDT cap at 10x is 1,000. Position sizing with leverage has the longer treatment.
The new-account leverage limit
Two account rules cap the leverage number itself, whatever the coin's table says. They are separate from -2027, and they explain why a leverage you expected is not offered:
- New futures accounts. Binance's FAQ: "Leverage levels of over 20x will not be available to Futures Accounts within the first 30 days of opening." In force since 7 December 2025.
- Sub-accounts. Since 12 August 2025, "leverage levels over 5x are not available to Futures Accounts created by regular users' sub-accounts." Asking for more returns -4421, a code Binance's public error list does not include.
Both leave the position tiers as they are. A new account at 20x still meets -2027 as soon as its position passes the 20x tier of the coin.
-2027 vs -2028 vs -4028
Three leverage codes that get mixed up. The wording is from Binance's USDⓈ-M error list:
| Code | Binance's text | What is wrong | Fix |
|---|---|---|---|
| -2027 | Exceeded the maximum allowable position at current leverage. | The position is too large for this leverage | Lower leverage, or a smaller position |
| -2028 | Leverage is smaller than permitted: insufficient margin balance. | The margin balance cannot support the leverage asked for, as when you lower leverage on an open position | Add margin or reduce the position first |
| -4028 | Invalid leverage | The leverage number is not offered for this coin | Pick a value at or below the coin's maximum |
-2027 is about size and -4028 is about the number. Since 9 October 2026 Binance's change log puts a coin's maximum at the initialLeverage of its first tier, so for BTRUSDT nothing above 10x is a valid leverage.
HafizeBot's autotrader meets all three on members' accounts. When it knows a coin's maximum it enters at the lower of that and the member's setting. When Binance still refuses for size, /lastsignals shows the trade with "the position would pass Binance's limit for your leverage on this coin", and the entry is not sent again. The full list of Binance Futures error codes has the rest, and Binance Futures leverage limits explains the caps behind them.
Frequently asked questions
What does "Exceeded the maximum allowable position at current leverage" mean? The order would take your position on that coin past the size Binance allows at your leverage. Each coin has tiers of position value, and higher tiers allow less leverage. Lower the leverage or reduce the size.
Why can't I close my position because of the maximum allowable position? Resting orders on the coin count towards the same limit. Binance's own instruction is to cancel the open orders on that coin and close again.
Does adding USDT fix error -2027? No. The limit compares position value with the cap for your leverage. Balance is not part of it; that would be -2019, "Margin is insufficient."
What is the maximum position at 10x on Binance Futures? It depends on the coin. On 15 November 2026 BTRUSDT allowed 5,000 USDT at 10x, 131 other perpetuals allowed 10,000, and BTCUSDT's first tier ran to 300,000 USDT. Check the coin's own table.
Is the limit per order or per position? Per position, with longs, shorts and resting orders on the coin counted together. Several small orders reach it as surely as one large one.
What is the difference between -2027 and -2028? -2027 refuses a position that is too large for the leverage. -2028 says the margin balance cannot support the leverage asked for, which is what you get when lowering leverage on a position you cannot fully margin.
Before the next order
Read the coin's tier table, divide the cap by your leverage, and keep the margin per trade at or under the result. Sources: Binance's USDⓈ-M error list and change log, its FAQs "Leverage and Margin of USDⓈ-M Futures" and "Summary of Failed Orders in Binance Futures", and the bracket endpoint read on 15 November 2026.
HafizeBot's signals are published with their results on the performance page, and questions about the autotrader go to @hafizebot. None of this is investment advice. Leveraged futures can lose the whole margin of a position; trade only what you can afford to lose.